1. Automatic rejection of defective products
2. Nitrogen filling and fresh-keeping function (residual oxygen content ≤0.8%)
3. Full servo filling system
4. Full-line non-stop feeding
5. Fixed number production function
6. Closed-loop weighing control system
7. Food contact Partially uses food grade 304
Product number | CFM-1 |
Applicable cup type | K-CUP/Dolce gusto espresso/nesspresso (customizable) |
Sealing material | Aluminum foil film |
Mechanical speed | 40 cups/min |
Canned quantity | 15g |
Canning accuracy | ±0.2g |
Nitrogen consumption | 150L/min |
Control System | PLC+bus communication |
Total power | 220V/50Hz (voltage can be customized) |
Gas demand | 0.7Mpa |
Overall line efficiency | 160 p/m (40p/l/p) |
Filling method | Servo custom screw |
Applicable raw material characteristics | Powder granule liquid |
Ensure sanitation, full servo screw filling system
Filling system adopts full servo drive control, only need to manually set the filling amount, without complex setting can achieve a key parameter adjustment. Under the action of servo mechanism, precise control of each filling amount, improve the product pass rate ≥98%. Professional design team based on years of accumulation of a large number of raw material particle size experimental parameters and data, according to the customer’s material characteristics, to provide the most reasonable screw parameters.
After putting the capsule into the machine module board, there is a photoelectric sensor to detect the capsule. No capsule, no filling, no tamping or unsealed.
Filling system with servo screw conveyor
Tamp the powder to make the powder surface smooth, and clean the top edge of the capsule for better sealing.
Optional uv sterilization lamp and anti-static device, clean filling, filling precision is higher.