Commercial Capsule Filling Machine CFM-6 Caflssimo Automatic Packaging Powder Espresso Cup

Short Description:

Technical Features

Speed: up to 210 capsules/min

6lanes

Possibility of integrated vertical flow-wrappers

Sliding-out dosing unit for cleaning and maintenance

Servo-driver machine

Quality control system

Special projects

Send email to us

Product Detail

Product Tags

Product Features

1. Automatic rejection of defective products
2. Nitrogen filling and fresh-keeping function (residual oxygen content ≤0.8%)
3. Full servo filling system
4. Full-line non-stop feeding

5. Fixed number production function
6. Closed-loop weighing control system
7. Food contact Partially uses food grade 304

Product Picture

Sample Bag Picture

Product Packaging Scope

Machine Configuration

Product number	CFM-6
Applicable cup type	Espresso Cup/K-Cup (customizable)
Sealing material	Pre-cut aluminum foil film
Control System	PLC+bus communication
Total power	220V/50Hz (voltage can be customized)
Gas demand	0.7Mpa
Overall line efficiency	160 p/m （40p/l/p）
Filling accuracy	20g±0.15g (powder)
Filling method	Servo custom screw
Applicable raw material characteristics	Powder granule liquid

Machine Parts Diagram

Drop Cups Structure

Option 1:

Straight-line drop cups pass through the straight-line feed tube, each tube working time is only 15 minutes (estimated 300-400 cups), low material level automatic alarm call through buzzer, manual feeding.

Option 2:

Horizontal conveying cup body structure, 0-shaped belt conveying is controlled by a discharge motor, machine speed is synchronized with the speed of the canning line body, the storage structure adopts a warehouse body to save the manual feeding cycle and time to the greatest extent, and can achieve a single feeding Time is controlled at every 1.5 hours

Option 3:

Centrifugal disc structure, rotating conveying synchronous canning line speed, the storage structure adopts the silo body to save the manual feeding cycle and time to the greatest extent, and can achieve a single feeding time controlled at every 3 hours, which is suitable for "fully automatic Production line demand".