1. Automatic rejection of defective products
2. Nitrogen filling and fresh-keeping function (residual oxygen content ≤0.8%)
3. Full servo filling system
4. Full-line non-stop feeding
5. Fixed number production function
6. Closed-loop weighing control system
7. Food contact Partially uses food grade 304
Product number | CFM-6 |
Applicable cup type | Nespresso (customizable) |
Sealing material | Online aluminum foil film |
Filter paper material | PP fiber + wood pulp |
Drain pan | custom made |
Control System | PLC+bus communication |
Total power | 220V/50Hz (voltage can be customized) |
Gas demand | 0.7Mpa |
Overall line efficiency | 160 p/m (40p/l/p) |
Filling accuracy | 15g±0.15g (powder) |
Filling method | Servo custom screw |
Applicable raw material characteristics | Powder granule liquid |
Option 1:
In the form of the cut sheet, the sheet is conveyed through the pipe body, and the servo motor is connected to the mechanical structure for fixed-point and timing grabbing, and the cup cover film is pressed by the electric heating plate. The center positioning accuracy: ≤0.5mm, sealed product Rate: 99%.
Option 2:
Roll film form, constant tension control unwinding mechanism, photoelectric servo positioning, using blade form to carry out coil die cutting, and complete the hot pressing step at the same time, center positioning accuracy: ≤0.5mm, sealing yield: 99%.
The canned products are determined by the second weighing, and the defective products are mechanically rejected by the chain plate structure.
Swing armer to pickup the capsule out, then return to packaging.