Liquid Capsule Filler CFM-2 Tea Coffee Capsule Filling Sealing Machine K-cup USA

Short Description:

Coffee Packaging Solutions

1. Automatic rejection of defective products

2. Nitrogen filling and fresh-keeping function (residual oxygen content ≤0.8%)

3. Full servo filling system

4. Full line non-stop feeding

Product Detail

Product Tags

Product Features

1. Automatic rejection of defective products
2. Nitrogen filling and fresh-keeping function (residual oxygen content ≤0.8%)
3. Full servo filling system
4. Full-line non-stop feeding

5. Fixed number production function
6. Closed-loop weighing control system
7. Food contact Partially uses food grade 304

Product Picture


Sample Bag Picture

CFM-4 (3)

Product Packaging Scope

application (2)

Machine Configuration

Product number CFM-2
Applicable cup type K-CUP (can be customized)
Sealing material Aluminum foil film
Mechanical speed 40 cups/min
Canned quantity 20g
Canning accuracy +-0.2g
Nitrogen consumption 150L/min
Control System PLC+bus communication
Total power 220V/50Hz (voltage can be customized)
Gas demand 0.7Mpa
Overall line efficiency 160 p/m  (40p/l/p)
Filling accuracy 25g±0.15g (powder)
Filling method Servo custom screw
Applicable raw material characteristics Powder granule liquid

Machine Parts Diagram

Weighing structure

Realizing automatic production management optimization: closed-loop weighing control system

The mechanical structure is connected by servo motor, and the weighing method is rotating up and down. The weighing precision is 0.002g, and the speed matches the canning line.
After real-time online weighing, each filling volume is adjusted by closed-loop control inside the weighing system to ensure that materials with different characteristics (humidity, viscosity, volume density) can also be filled with high accuracy. Each filling result can be recorded in the system. Data can be stored separately or connected to factory MES systems

Top membrane sealing structure

Alternative 1:

Ensure product sealing: the plate is conveyed through the tube body in the form of cutting pieces, the servo motor is connected to the mechanical structure for fixed point and timing grab, and the electric heating plate presses the lid film. Center positioning accuracy: ≤0.5mm, sealed yield: 99%.


Alternative 2:

Film forming, constant tension control unwinding mechanism, photoelectric servo positioning, the use of blade forming coil die cutting, while completing the hot pressing step, center positioning accuracy: ≤0.5mm, sealing rate: 99%.ep at the same time, center positioning accuracy: ≤0.5mm, sealing yield: 99%.


Reject defective products

Improve production quality: canned products are determined by the second weighing, and defective products are rejected mechanically by chain plate structure.


Reject defective products


Swing the output arm

Swing the output arm

Swing arm to remove the capsule, then return to packaging. Maximize labor cost savings



  • Previous:
  • Next: